manualshive.com logo in svg

TAC Xenta 555, Инструкция к добавке, Страница: 16 / 82

Поделиться
Скачать
TAC Xenta 555 Скачать руководство пользователя страница 16

1  About this Manual 

TAC Xenta 555, Supplement Manual

16 (82)

TAC AB, Oct 2006

04-00054-01-en

1.3

Typographic Conventions

Throughout the manual the following specially marked texts may occur.

1.4

Prerequisites

To be able to profit from the contents in this manual, you are recom-
mended to read the following manuals:

•

Classic Networks, Technical Manual

, and/or

•

LNS Networks, Technical Manual

.

•

VisiSat Engineering Guide

 (Version 2.0 or earlier for Satchnet net-

works, Version 2.1 or later for MicroNet networks).

!

Warning

•

Alerts you that failure to take, or avoid, a specific action might 
result in physical harm to you or to the hardware.

Caution

•

Alerts you to possible data loss, breaches of security, or other 
more serious problems.

Important

•

Alerts you to supplementary information that is essential to the 
completion of a task.

Note

•

Alerts you to supplementary information.

Tip

•

Alerts you to supplementary information that is not essential to 
the completion of the task at hand.

Содержание Xenta 555



















































































Отзывы:

Нет отзывов