TAC Xenta 555, Инструкция к добавке

Страница: 65 / 82

TAC Xenta 555, Supplement Manual 9 MicroNet Objects in XBuilder
TAC AB, Oct 2006 65 (82)
04-00054-01-en
• MN3x0 – This object represents any of the following:
• MN300 series controller or an MN350 series controller.
• Unifact 1201 or Unifact 2201.
• MN4x0 – This object represents any of the following:
• MN440 series controller or an MN450 series controller.
• IAC400 or IAC420.
• Any Unifact Pro or Bonsai controller.
• MN5x0, MN6x0 – This object represents any of the follow-
ing:
• MN500 series controller or an MN550 series controller.
• MN620 series controller or an MN650 series controller.
• IAC600 controller.
• MMC – This object represents an MMC3601 or MMC4601
controller.
9.3 Point Signals
All signals imported from MicroNet (except for the three described
below) are represented by the standard Xenta point signal icon:
The following three signal icons represent MicroNet VisiSat objects:
• Time Schedule – This object represents a MicroNet time
schedule object (general).
• Optimiser Time Schedule – This object represents a time
schedule for use with the MicroNet optimiser object only.
• Holiday Schedule – This object represents a MicroNet holi-
day schedule object.
9.3.1 MicroNet Point Signal Attributes
All point signals imported from MicroNet (with the exception of time
and holiday schedules) are of one of three data types, as shown in the
DataType field of the XBuilder properties pane:
• Integer –
a number that is an integer.
• Real –
a real number (for example, 31.4). Default = one deci-
mal place.
• String –
a string may contain any ASCII characters.
Only two point signals, Online Status and Null Outputs, are of the bool-
ean data type: