manualshive.com logo in svg

Taarup BIO+ B4000, Руководство оператора

Поделиться
Скачать
Taarup BIO+ B4000 Скачать руководство пользователя страница 69

69

1

Maintenance

6.1.5 Grinding of cutter knives

Blunt cutter knives causes increased fuel consumption and increased risk of conveyor drum
blocking. Knives might be pressed away from the conveyor drum, causing material to remain
uncut.

Grinding interval length depends highly on the type and contamination of the straw material. If
straw material is mixed with sharp and hard particles, it might be necessary to grind knives
every 250 bales.

Knives should be ground on the 

plain

 side only. Use a disc for knife grinding, not a regular

cutting disc.

6.1.5.1 Changing the blades

OC14

Warning:

During all work on the cutting system, switch
off the engine and wait for the machine to
come to a complete standstill. Close the cut-
ting system hydraulics with the lock valve.
Always wear protective gloves when working
with the blades and never touch the blades
on the cutting edge.

Move out the cutting system hydraulically

Open the chamber top section hydraulical-
ly

Secure the top section - close the upper
lock valve in front of the machine (1)

Close the lock valve (B) of the cutting sys-
tem located on the right-hand side of the
machine

Switch off the tractor engine

Turn the blade shaft, lower the lever (A)

Grip the blade at the end and pull out up-
wards, alter the position of the conveying
tines by turning the conveying drum, if
necessary

Sharpen the blades (only when disassem-
bled)

Mount the blades in the reverse order

Содержание BIO+ B4000















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды