Taarup BIO+ B4000 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 78

background image

4

Operator´s manual BIO bale processor B4000

Guarantee

Taarup products are guaranteed for a period of one year from the date of delivery, against defects in
material and workmanship.

Components not manufactured by Kverneland, i.e. electrics and hydraulics, PTO shafts and tyres are
guaranteed according to the original manufacturer’s recommendation.

The components listed below have limited guarantee due to their function:

Tyres
Pre-stretcher rollers
Belts
Knives
Lamps
Fuses
Oil filter
Hydraulic seals of motors, valves and cylinders.

Weakening due to wear and tear is considered to be normal for these parts. The product guarantees for
these components are limited to manufacturing defects, breakage, poor workmanship, transport damage
etc on new machines.

Any damage to bearings that are fitted with grease nipples is not covered under the standard product
guarantee, if the damage is shown to be caused by rust or due to the ingress of liquids. Such damage is
caused by insufficient lubrication or the use of low quality lubricants.

Any damage caused by the use of corrosive additives in or nearby the machine is also not covered.

If a failure is expected to be covered under the guarantee, the owner or its representative should inform
the dealer when parts and/or repair work is required. Any guaranty claim should be applied for within the
period of guarantee.

The dealer should fill in one guarantee claim form for each matter and forward it to the Kverneland sales
company or importer before the 10th of the following month after the claim was raised.

The damaged parts should be marked with the number of the corresponding warranty claim and should
be stored for 6 months by the dealer, available for inspection by the Kverneland sales company or
importer if required.

Due to the operation of the Taarup products being out of the manufacturer’s control, the guarantee
covers the product quality only. Performance or any consequential losses are not covered.

The guarantee may be invalid if:
a) spurious spare parts are used or the product is repaired or modified without the Kverneland authorisa-
tion.
b) operator’s and service instructions given by the manufacturer are not complied with.
c) The machine is used for other purposes than those designed for.

The guarantee does not cover damage caused by normal wear.

Public safety regulations require from the manufacturer of this machine that all safety aspects regarding
the use of the machine is thoroughly evaluated. As a result of these obligations Kverneland and its
importer or sales company are not responsible for the function of components not shown in the spare
parts catalogue covering this product.

Kverneland reserve the right to change the product with no obligation to previously supplied machines.

Guarantee

«
...
2
3
4
5
6
...
»

Содержание BIO+ B4000















































































Отзывы:

Нет отзывов

Похожие инструкции для BIO+ B4000

Бренд: Varec Страницы: 74

Бренд: Halyard Страницы: 84

Бренд: PAIDI Страницы: 48

Бренд: Gardena Страницы: 13

Бренд: Raven Страницы: 27

Бренд: Raven Страницы: 79

Бренд: Raven Страницы: 88

Бренд: Quincy lab Страницы: 4

Бренд: Tate Страницы: 7

Бренд: Tate Страницы: 5

BioHarmonex BH4

Бренд: Calivita Страницы: 38

Бренд: CAIRE Страницы: 91

Бренд: Haki Страницы: 24

Бренд: Dakota Digital Страницы: 5

AquaPure Ei Series

Бренд: Jandy Страницы: 4

AquaPure Ei Series

Бренд: Jandy Страницы: 8

Jandy Pro Series

Бренд: Jandy Страницы: 16

MiniLift160 Classic

Бренд: Handicare Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды