Taarup 7640, Руководство оператора

Страница: 49 / 72

49
10.7.5 Filmbreak sensor (5)
Activates filmbreak sensor and optionally ½ speed by film end.
0 = Filmbreak sensor not activated
1 = Filmbreak sensor activated
Filmbreak is notified by audio signal. Stop the satellite manually.
When filmbreak is solved, reset the error message with the C-key
and activate the process with OK.
2 = Filmbreak sensor is activated.
Filmbreak is notified by audio signal and the the satellite stops.
If the operator wants to continue wrapping with one filmroller only,
reset error message with the C-key and activate the process with
OK. The system automatically reduces the table speed to ensure
correct film overlap with only one film roll. (Optional)
If the operator wants to continue with two rollers, he has to
replace the roller before error message is reset. The process is
resumed by activating the OK-key.
The system will start with reduced speed, but will automatically
speed up when it detects that both filmrollers are OK.
Lost film application caused by the filmbrake is corrected due to
reverse bale rotation and additional satellite rotations.
10.7.6 Not in use (6)
Screen 6 is not displayed
10.7.7 Not in use (7)
Screen 7 is not displayed
10.7.8 Remote control (8)
Activates remote control ON - OFF. The function needs to be re-
activated if the power supply is interrupted. Remote control only
possible in auto mode, but unloading must be activated separate-
ly due to safety.
0 = Remote control not activated
1 = Remote control activated
10.7.10 Clock (10)
The current time can be read and adjusted in this user screen.
Operating model C
10.7.9 Next lubrication (9)
The next lubrication time is presented in this screen. The operator
can edit this value. When the internal lubrication timer reaches
zero, a lubrication warning will appear in any of the main process
screens. Here is displayed 49 hours more to wrap before
lubrication interval has been reached.