T3 Motion MotionTrak 330 4CH, Руководство пользователя

Страница: 32 / 52

Setting Drive Recorder
Record Mode Normal Mode: Continuous recording will automatically
To record Camera2 or Camera3, Camera4 check “Use” box.
To record Audio, check “Record Audio” box.
To use Motion Detection as an Event, check “Motion” box per camera.
Record Mode Normal Mode: Continuous recording will automatically
start after booting the MotionTrak330 4CH.
Event Mode: Recording by Motion Detection, G-
sensor, Alarm 1~3 or [PANIC] button.
Motion Sensitivity Select Motion Detection Sensitivity from 1 to 5.
5 (High): The most sensitive
4
3 ( iddl ) D f lt
l 3 (middle): Default value
2
1 (LOW): Insensitive
To record by Motion Detection
Check Motion per camera and set Record Mode as Event Mode.
Dual Recording (If you set different record modes per camera)
Example: camera1 set as Event record and camera2 set as Normal record,
camera1 (Event record) will work according to the record setting at 10
frames per second, when there is a event. However camera2 (Normal
record) will record 1 frame per second, if there is no event. If there is an
Event, both cameras will record according to the record setting for example
10 frames per second recording.
32