T3 Motion MotionTrak 330 4CH, Руководство пользователя

Страница: 42 / 52

APPENDIX (Firmware Update)
First, update the MotionTrak330 4CH main unit,
Second, install new PC Viewer software on a PC and then initialize
the SD card using the new PC Viewer software
Make [program] folder at SD root folder as below,
the SD card using the new PC Viewer software.
1. Preparing Firmware .
[NOTE] To get updated firmware, please contact your local distributor,
new firmware versions are released occasionally by D-TEG.
Copy “BX4000_X.X.X.bin” file in to the SD card [program] folder.
.
2. Update of the MotionTrak330 4CH.
Insert the provided SD card into the MotionTrak330 4CH and apply power
to the unit.
The Blue & Red LEDs will be blink rapidly while the unit is updating.
It will also “Beep” continuously, updating usually takes about
2 to 3 minutes.
Warning: Do not turn off the power to the unit during updating. If the
update fails, the “MotionTrak330 4CH” unit should be returned to
your local distributor.
Once the updating is finished, the unit will automatically turn off and restart.
Test the MotionTrak330 4CH to ensure proper recording functionally,
turn off the power. Insert the SD card into a PC and initialize it using the
PC Viewer software.
42