T3 Motion MotionTrak 330 4CH, Руководство пользователя

Страница: 11 / 52

SD Memory Card Format
Remove power from the unit, Press and hold the [PLAYBACK] & [PANIC]
FUNCTION (MAIN UNIT)
button. Then reconnect power to the unit.
Press and hold the [PLAYBACK] & [PANIC] for more than 2 seconds after
applying power. The SD card initialization will begin.
Once complete, all video & log files will be deleted and the configurations
will default to the factory settings.
Notice : PC Viewer software is pre-loaded on the SD card. Please ensure
you have installed the software to your PC before formatting this card.
Built-in power backup (Super Capacitor)
When power to the unit is interrupted, the MotionTrak330 4CH saves the last
file using an internal Super Capacitor.
BLUE LED (RECORD)
The Blue LED illuminates when power is applied and blinks during event
recording.
RED LED (Overwriting)
The Red LED is illuminated when overwriting.
Buzzer
A “Beep” sound will occur when event/panic recording begins (this feature can
be turned off in the setting menu on the PC Viewer software, if required).
Also this “Beep” sound signals any system error
Also this Beep sound signals any system error.
VIDEO LOSS (warning)
A “Beep” sound will occur continuously when video is lost.
Check the camera(s) and camera connection(s), turn off/on the unit to resolve.
Make sure all camera(s) are connected before turning on the unit.
The number of camera(s) can be set in the settings menu on the PC Viewer software.
11