T3 Motion MotionTrak 330 4CH, Руководство пользователя, Страница: 12 / 52

OPERATION
1. Make sure that the power cable is properly connected and turn on the
vehicle power.
2. The Blue LED & Red LED will illuminate and slowly blink simultaneously,
then the Blue LED will remain constantly on. The Blue LED light means the
MotionTrak330 4CH is now ready for the event recording and has started
the Normal recording (Continuous recording).
3. The normal recording (Continuous recording) will be automatically start if
set via the PC Viewer software.
4. The event recording will automatically begin when triggered by an event
such as motion detection, Alarm 1 to 3 or by the G-sensor and will be
signaled with one short “Beep” sound.
5. The panic recording can be started by pressing the [PANIC] button.
Removing the SD memory card
Turn off power to the unit and check the BLUE LED light. Once the BLUE
LED light is no longer illuminated, remove the SD memory card.
Inserting the SD memory card
System Error Buzzer
Turn off power to the unit and check the BLUE LED light. Once the BLUE
LED light is no longer illuminated, insert the SD memory card.
System Error Buzzer
Two “Beeps” will sound and the BLUE & RED LED lights will blink
simultaneously when there is a system error or the SD card is not inserted.
[Check the SD memory card when this occurs. To resolve the problem,
initialize or replace the SD card]
12