T3 Motion MotionTrak 330 4CH, Руководство пользователя, Страница: 34 / 52

Setting Drive Recorder
To record the vehicle signal with video, set the Alarm configuration as follows:
To use the Alarm as an Event trigger, (i.e.: so Event recording will start when a
door is open or Meter is on) set the Alarm configuration as follows:
G-Sensor setting
If the G-sensor sensitivity value is set too high approximately 5 the unit becomes If the G sensor sensitivity value is set too high approximately 5, the unit becomes
too sensitive, detecting even a light impact or slight turn. If the G-sensor sensitivity
value is set too low, the unit might not detect a notable impact. So when setting the
unit sensitivity the vehicle’s suspension, condition and road conditions should be
taken into consideration.
Un-check the Event Record box to avoid recording an Event triggered by the G-
sensor.
34