COLLARING MACHINE
15
T-65CU
The speed selector
The feed mechanism lever
1. The speed selector knob is on the top of the gearbox of the tee forming unit. To
engage high or slow speed, turn the selector knob 180°. The selected speed as shown in
the picture. Slow speed I is used for forming of the tee and trimming. High speed II is for
drilling. If the torsional force of the machine is not sufficient, then turn the speed selector
to speed I. If the feed does not engage smoothly rotate the motor by “pumping” the
trigger.
Use maximum speed of rotation when drilling and forming the outlet.
2. The feed mechanism lever is situated near the chuck-ring. The feed mechanism has
been engaged (on) when the lever is turned downward, i.e. as shown on the illustration.
If the feed does not engage smoothly rotate the motor by “pumping” the trigger.
¨
NOTE! Do not force lever.
