INSTRUCTION MANUAL
18
6.2.3 CHANGING THE OUTLET SIZE
1. Loosen the screws on the cover plate
by about one circle using a 3 mm hexagon
wrench that is supplied with the T-DRILL
package.
2. To enlarge the outlet rotate the conical
cover with respect to the cover plate in plus
(+) direction. Hold the cover plate stationary.
To make a smaller outlet rotate the conical
cover in minus (–) direction while holding the
cover plate stationary.
One notch on the cover-plate equals to 0.01”
or 0,25 mm on the forming pin span.
3. Tighten the two screws on the cover plate
and check the adjustment either by mea
-
surement across the pins or by forming a trial
outlet.
