INSTRUCTION MANUAL
26
7. MAINTENANCE
7.1 THE MAINTENANCE OF THE T-DRILL T-65
Clean dust and dirt from machine surface and power unit vents periodically.
The T-DRILL T-65 is prelubricated and does not need special attention for maintenance.
7.2 THE POLISHING AND REPLACEMENT OF THE FORMING PINS
1. Loosen the two screws on the cover
plate one turn and rotate the conical
cover relative to the cover plate so that
the conical cover can be removed.
2. When the conical cover is removed
rotate the cone so that the forming pins
can be slided from the shank.
The forming pins can now be polished
with a felt polishing wheel.
3. Reassemble the collaring head using
new or polished forming pins and adjust
the correct collaring diameter.
Check the alignment when assembling.
