COLLARING MACHINE
23
T-65CU
6.5 ANNEALING OF TUBE
L
DANGER! The annealed work piece is extremely hot after annealing.
When working with the tube protective gloves should be used.
1. Anneal the area where outlet is to be
formed to a dull red. The area will remain
annealed even when cool. It is not necessary
to form the outlet on hot tube!
2. Attach counterplate to the tube where
annealing has been done.
3. Lubricate forming pins and cutting edges on
T-DRILL head.
4. Retract forming pins on T-DRILL Head and
attach T-DRILL T-65 to counterplate. Notches
on tube support fit on tabs of counterplate.
