T+A PSD 3100 HV, Руководство пользователя

Страница: 46 / 60

Playback from a computer (USB-DAC)
Minimum system requirements
Intel Core i5 or higher or a comparable AMD Processor, 4 GB RAM, USB 2.0 Interface, Microsoft Windows
10, 8.1, 8 or 7, Linux with 4.4 Kernel or higher or MAC OS X 10.13.6 or later version
Driver installation for Windows
For playback via USB, from a connected Windows PC, specific driver software is required on the computer.
The required drivers and a detailed installation manual are available for download on our homepage at
http://www.ta-hifi.com/support .
No drivers are required when using a computer with Linux or Mac OS.
System settings
A number of system settings have to be altered if you wish to operate PSD 3100 HV with your computer.
These changes must be made regardless of the operating system. The installation instructions provide
detailed information on how and where the settings are to be changed.
Playback
• If necessary, first reduce the set volume.
• Switch on the computer.
• Select the USB input using the source selection buttons on the device or the remote control.
• If necessary, select the PSD 3100 HV as the output device in the system settings of the operating sys-
tem.
• Open the playback software on the computer.
j
Do not disconnect the USB connection during operation. Do not turn off the PSD 3100 HV during playback. This
can lead to malfunctions and crashes.
If there is a malfunction during playback, restart the computer.
The playback of files stored on the computer cannot be controlled by the PSD 3100 HV or F3100.
The playback of DSD files is restricted to a maximum of DSD 256 on Apple MAC computers, as Apple only sup-
ports playback in DoP format and does not support native streaming.
46