T+A PSD 3100 HV, Руководство пользователя

Страница: 29 / 60

DHCP on
If your network includes a DHCP server, please select the ON setting at this
point. In this mode an IP address is automatically assigned to the PSD 3100 HV
by the router. The screen shows only the MAC address and the message DHCP
state ON. In this case the address input fields shown in the illustration do not
appear in the menu.
off
If your network does not include a DHCP server, please select the OFF set-
ting. In this mode you must configure the following network settings manually.
Please ask your network administrator for the addresses to be entered for your
network.
IP
IP Adress of the PSD 3100 HV
Subnet mask
Network mask
Gateway IP Adress for the router
DNS Name / IP of the name server (optional)
Store and exit?
Stores the network parameters, and restarts the PSD 3100 HV with the new
settings
Discard and exit?
Closes the menu: data already entered is discarded
Connecting to WLAN
(radio connection)
• Connect both of the supplied WLAN antennas to the WLAN sockets on the back of the PSD 3100 HV.
Depending on your reception and set-up situation, the antenna can be mounted directly on the socket
on the back or together with the magnetic base supplied.
• For setting up the WLAN connection, open the menu for system settings and then the
menu item Network.
Menu item Setting / Explanation
MAC
The MAC address is a hardware address which uniquely identifies your
machine. The address displayed is determined by the manufacturer, and cannot
be altered.
Conncetion state
Shows the connection state: WLAN, LAN or not connected.
WPS autoconnect Activates the WPS function to connect the PSD 3100 HV to the WLAN via WPS.
See chapter
Setup via the WPS function .
Scan for WLAN Starts the scan for WLAN networks that are within reception range.
j
All other menu items are the same as for the connection via LAN. See above for more information.
29