T+A PSD 3100 HV, Руководство пользователя

Страница: 28 / 60

Network configuration
General information
All network settings are carried out in the system settings under the menu item Network.
If the PSD 3100 HV is not connected to a wired network via its LAN port, the WLAN module is activated and
the the Network menu displays the menu items for setting up the WLAN connection.
j
If you want to connect the PSD 3100 HV to the home network via WLAN, the LAN port must remain free.
Menu operation
• Open the system settings menu by pressing the
SRC / SYS
-button on the remote control.
• Select the Network menu item with the buttons and confirm with the OK - button.
• In the network menu, select the network parameter to be changed with the buttons and activate
the entry with the OK - button.
• Now you can change the setting depending on the type with the following buttons:
buttons at simple selection (ON/OFF)
buttons at IP addresses and alphanumeric input of text.
• After the setting has been made or the address has been entered completely, confirm the entry with
the OK - button.
j
The network parameters can only be set using the remote control.
Connection via LAN
(cable connection)
• Connect the PSD 3100 HV to an operational network
(router) or power line modem via the rear LAN port.
• Switch on the PSD 3100 HV.
• Usually, an IP address is automatically assigned to
the PSD 3100 HV by your router (via DHCP) and the
PSD 3100 HV is ready for operation after the start-up
process of the streaming module.
• If this is not the case, open the network menu (Net-
work) and set the network parameters listed below
according to your network settings.
Menu item Setting / Explanation
MAC
The MAC address is a hardware address which uniquely identifies your
machine. The address displayed is determined by the manufacturer, and cannot
be altered
Conncetion state Shows the connection state: WLAN, LAN or not connected
28