T+A PSD 3100 HV, Руководство пользователя

Страница: 27 / 60

Tone configuration
Balance
This menu point is used to alter the balance in level between the left and right chan-
nels, e.g. to compensate for non-symmetrical loudspeaker positioning. The balance
can be adjusted in increments of 1 dB; the screen always displays the current value.
Loudness The PSD 3100 HV is equipped with a volume-dependent tone control (LOUDNESS) cir-
cuit, which compensates for the frequency-dependent sensitivity of the human ear at
very low volume levels, due to the characteristics of aural physiology.
This menu point is used to switch the loudness circuit on and off.
Loudness level
This menu point is used to adjust Loudness to suit the loudspeakers and the listening
room.
Tone control This menu point can be used to disable (by-pass) the PSD 3100 HV‘s tone controls.
To switch off the tone controls, select the “
OFF
” setting. When the tone controls are
switched off, any adjustments you make to the following menu points “
BASS
” and
“
TREBLE
” have no effect.
Treble Under this menu item you can disable not used sources, and assign a plain text name to
each source which is in use; this name then appears in the screen displays.
Bass
If you wish to connect a device with its own volume control (e.g. TV set), this menu point
can be used to disable the volume control of the PSD 3100 HV for the Analog IN 1 input
(pass-through mode).
27