- 14 -
User instructions
Pressure controller REP 6/10
2.3 Manufacturer, Service Addresses
Please get in touch at the following address if you have any questions regarding our products:
Systemair AB Industrivägen 3
SE 739 30 Skinnskatteberg, Sweden
Tel +46 (0)222 440 00
Fax +46 (0)222 440 99
3. General Description
3.1 Range of Uses
Variable pressure control of variable voltage 1~ motors.
Pressure sensor DSG can be used.
3.2 Technical Data
•
Rated voltage 1~ 230V, 50/60Hz
•
Rated current REP 6:
6A
REP 10: 10A
•
Minimum motor current 0.2A
•
max. Power dissipation approx: REP 6: approx. 16W
REP 10: approx. 23W
•
Regulated output voltage approx. 0-100%
•
Output 0-10V I
max
10mA (short-circuited protected)
•
Power 24V ± 20%, I
max
70mA
•
Ambient temperature 0-40°C
•
Relative humidity 85% non-condensation
•
Suppression complying to EN 50081-1
•
Suppression stability complying to EN 50082-2
•
Enclosure IP54
•
Semiconductor fuse
REP 6:
10A
REP 10: 20A
•
Settings
- Reference value 0-100 %
Pressure sensor measuring range (Pa)
- Control range (P-band)
- n-min: min. output voltage 0-100%
- n-max: max. output voltage 0-100%
- Control ratio
P(Pa),
↓
⇒
n
↑
(Normal)
P(Pa),
↑
⇒
n
↑
