SystemAir Combi Unit Genius, Инструкции по установке, эксплуатации и обслуживанию

Страница: 82 / 124

10.10.1 Command Add signal
Add signal
Figure 28:
Add signal
Add signal:
1. Select a value in the Add signal window.
2. Decide whether the value should appear on the left or right scale.
3. Repeat 1 and 2 for all the values that you want to record.
The recording starts.
Adjust the vertical scale values : + / - and up / down buttons
"
Reduce the highlighted scale by the + button.
"
Increase the highlighted scale by the - button.
"
Move the highlighted scale up with the up button.
"
Move the highlighted scale down with the down button.
TIP
It may be useful to record the status of the unit (rotor operation, defrost, etc., illustrated with figures, see above) on a
scale of 0 to 10. Display a second scale in parallel with values from 0 to 100 to capacity demand, supply air tempera-
ture etc.
Change the horizontal time scale: + / - and left / right button
"
Reduce the scale with the + button.
"
Increase the scale with the - button.
"
Move the scale to the left with the left button.
"
Move the scale to the right with the right button.
82
Operation/Control via Internet/App
Genius - V 1.0