SystemAir Combi Unit Genius, Инструкции по установке, эксплуатации и обслуживанию

Страница: 27 / 124

7.3 Internet Connection
The controller is preconfigured for Internet access. It is connected to the TCP/IP interface with the router via a network cable. Subse -
quently, the router will automatically issue an IP address to the controller. This must be read out from the router settings.
7.3.1 Log on
"
Start internet browser
"
Enter the IP address to the command line.
The log on screen will be displayed.
"
Save the log on page to the favourites and rename it if required.
7.3.2 Passwords
Delivery setting
User level: guest
Service level: operator
7.3.3 Settings
7.3.3.1 Define Room Addresses
Establish a connection from the controller to the building service centre to activate the room controller. First visit the website to define
the room addresses in "Settings, activate supply air rooms".
"
Log on to the website.
"
Define the room addresses with Settings room addresses .
Types and addresses can be found at the rear side of the room controller (inside). The following example shows the address composition.
(see „10.8.1.6 Activate Supply Air Rooms/Room Controller“ page 77)
Example RC-CDO149.039
RC-CDO Sensor type
149
039 ModBus address (relevant address for the network connection)
Settings
Activate supply air rooms
Number of rooms 6
Room 1
Modbus room address (ELA) 197
Room 2
Modbus room address (ELA) 39
Room 3
Modbus room address (ELA) 147
Room 4
Modbus room address (ELA) 82
Room 5
Modbus room address (ELA) 237
Room 6
Modbus room address (ELA) 200
27
Genius - V 1.0
Commissioning