SystemAir Combi Unit Genius, Инструкции по установке, эксплуатации и обслуживанию, Страница: 24 / 124

6.6.2 Connection Ventilation Module to Controller
The connection of the ventilation module is done by three plug connectors. The plug connectors are located on the left side in the upper
part of the basic module. They are already connected (see „6.4 Location“ page 19).
The terminal assignment can be found in the wiring diagram (see appendix).
6.6.3 Room Controller
The room controllers of the type RC-CDO are supplied as accessories and include a separate installation instructions. The shown wiring
diagrams are valid for all functions of the controller. The electrical connection of the room controller is documented in the appendix
(required for the air heating system).
6.6.4 Display
The delivered display is ready to plug.
"
The display can be fixed by the enclosed magnet (e.g. to the rear side).
"
The display also can be wall-mounted (preferable the installation room).
6.6.5 PTC Elements
The PTC elements (if required) are controlled by the individual room controller and switched with a relay. The electrical connection of the
PTC elements is documented in the appendix (required for the air heating system).
NOTE
"
The electrical installation of the PTC elements must be carried out by the client!
6.6.6 Internet Connection
The unit can be controlled via internet. The controller of the Combi Unit Genius provides a TCP/IP connection (see appendix/electrical con-
nection diagram).
"
Connect the TCP/IP interface of the controller N1 with a network cable directly to the internet connection/router.
6.7 Connection Air Duct System
(see „1.5.1 Professional Planning“ page 6)
24
Assembly
Genius - V 1.0