Syntec 610-E5, Руководство по эксплуатации, Страница: 35 / 129

机床产品
/Machine Tool Products
–
610-E5/610-H5 5-Axis Wood Operation Manual
Function Key and System Configuration
–
•
•
•
•
•
•
•
•
•
•
a.
•
b.
•
c.
•
d.
•
•
•
e.
•
•
•
f.
•
•
g.
•
•
•
•
•
•
•
h.
•
•
•
•
•
•
Absolute coordinate
Distance to go
Feed rate
Spindle
Program Monitor Block
This block will display current machining program
Yellow bar indicate to the current running block.
Machining Information
Function
It is overlap with
「
Process Setting
」
.
Press
「
Parameter Set
」
can switch display information.
Description
G Code
It will show the G code under machining
Run Time Accum
Processing time for this workpiece now
Run Time
Total machining process time
Percentage ratio
G00 percentage
G01 percentage
Spindle speed percentage
Total Acum Par
Total work pieces that had been finished.
System won't do any initialized action automatically.
If you want to do the initialization by manual, press
「
Parameter Set
」
switch to
「
Part
count
」
, set the
「
Total Acum Par
」
as 0.Part Count
Part Count
Count no. will begin from zero when the program is running.
Total work pieces number machined by CNC
Start Block
We can set the start block of machining process.
n: Set the start line number as n. (Ex. 20)
L+n: Set the start line number as n. (Ex.L20)
N+n: Search N+n located line number and then assign that line as the start line (Ex. N3).
T+n: Search T+n located line number and assign it as the start line (Ex. T01).
If line number is out of max line number, then it will assign to the last line.
Please refer to 3.4.3.4 break point initialization about start block go back.
Tool Data
T
4 numbers
The first two code are the tool no..
The last two code are the tool compensate no.
Display Area of Machining Setting
Description
This area is overlap with
「
Machining Information
」
, press F4
「
Parameter Set
」
to change the
displays.