Syntec 610-E5, Руководство по эксплуатации, Страница: 22 / 129

机床产品
/Machine Tool Products
–
610-E5/610-H5 5-Axis Wood Operation Manual
Function Key and System Configuration
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Execute
Command
5 Buttons type: F2 Program → F4 File Manager → F5 Execute
8 Buttons type: F2 Program → F8 File Manager → F5 Execute
Function
Execute current program. and also change the screen to the
「
monitor
」
page.
Operation Method
Use
【
↑
】【
↓
】
to select file, and then press
「
Execute
」
the selected file will be the executive file.
Note
This function is invalid when machining.
Choose DNC File
Command
5 Buttons type: F2 Program → F4 File Manager → Next → F6 Execute
8 Buttons type: F2 Program → F8 File Manager → F6 Execute
Function
Execute program stored in external devices, such as USB/Network.
Operation Method
Use
【
↑
】【
↓
】
to select file, and then press
「
Confirm
」
the selected file to be executed.
Title of selected file will be showed : DNC + file name
Note
Valid from - 6MDs/6s
：
2.2.0(10.116.10) 11s
：
2.2.1(10.116.10A) 21s
：
2.2.0(10.116.10) 20s
：
10.116.24
When a file reading fail, the control will retry 100 times before pop up a error message
A DNC program must use M30 as the end of program
USB DNC function does not support MACRO function
USB DNC function supports O888800, O999900, and Pr3851=0 functions (after 2.2.5)
When M98, G65, or G66 is used, the subprogram must be stored in controller
1.5 Offset/Setting
Path
5 key, 8 Key
：
F3 Offset/Setting
10+8 key
：
G3 Offset/Setting
Explanation
Offset/Setting function setup are under this fenubar group
Able to switch between pages in the group with hot key
【
Offset/Setting
】