Synesso S Series, Руководство пользователя

Страница: 4 / 41

4
The conductors of the power supply cord are
marked
“ L1 ”, “ L2 ” for the ungrounded (“ hot ”)
supply conductors and “ G ” for an equipment
grounding lead.
Warning: Risk of Fire. Use UL Listed Grounding
Type Plug rate for 220 Volts, ______ Amperes,
_______ Phase, #______ Wire. Plug to be Selected
and Installed only by Qualified Service Personnel.
Electrical
WARNING: Disconnect from
power supply before servicing
AVERTISSEMENT: Couper
l ’ alimentation avant l ’ entretien
et le depannage.
California
only:
WARNING
This product can expose you to
chemicals including lead, which is known to
the State of California to cause cancer, birth
defects, or other reproductive harm. For
more information, go to
www.P65Warnings.ca.gov.
Electrical
Box:
This equipment is to be installed to
comply with the applicable federal,
state or local plumbing codes.
Under drain
tray
Materials information for Synesso ™ machines:
•
All stainless steel coming into contact with the water supply is 300 series
•
All brass fittings are low lead per the CA360 specifications or better
•
All electronic devices are lead free
•
All gaskets are made from food - contact safe material
Test Information:
•
Brew (coffee) tanks are hydrostatically tested to 375 psi
•
Steam tanks are pressure tested to 75 psi
•
The electrical system is subject to an electrical withstand test of: 1.20 kV AC for 1 sec-
ond, with a 7 mA limit.
IMPORTANT Information for Synesso ™ Espresso Machines: DISCONNECT FROM POWER BEFORE SERVICING.
•
Read the entire manual before operating this machine.
•
Steam and condensation from the steam wand discharge are very hot and may cause burns.
•
The steam wand tips and bases become hot during use: do not touch these surfaces.
•
Cover the steam wand tip or submerge in a filled pitcher to safely divert the steam before opening the
steam valve.
•
Never remove the steam wand from the product that is being heated when the valve is open.
•
Never remove the portafilter from the machine during the active brewing process.
•
Keep water and moisture away from any electrical device or live power.
•
Steam tank water is heated to 260°F (126°C) or more; Use caution near steam tank.
•
The brew groups deliver water as hot as 210°F (99°C). Avoid exposure to this water.
•
The hot water mix valve can be adjusted to deliver water as hot as 212°F (100°C), which can cause severe
burns: please use caution when activating this water source.
Safety Label Locations:
Synesso ™ complies with UL regulations by posting the following labels on its machines:
SAFETY WARNINGS