Synesso S Series, Руководство пользователя

Страница: 31 / 41

31
MAINTENANCE
MAINTENANCE SCHEDULE
Proper and regularly scheduled cleaning and maintenance procedures are CRITICAL for optimum perfor-
mance of your espresso machine.
Daily
1.Backflush each brew group without detergent throughout the day. Backflush with an espresso industry
approved detergent during the final cleaning of the night (or after a busy period) and then again without
detergent to rinse.
2. Purge wands before and after each use. Wipe wands and steam tips with a damp cloth after each use.
Clean the wands and steam tips with approved espresso industry milk cleaner during the final cleaning of
the night.
3. Wipe down the entire machine with a soft cloth.
4.Remove portafilters, baskets and springs, drip tray and grates and clean all thoroughly. These items are all
dishwasher safe (with the exception of wooden handled portafilters).
5. Slowly pour a pitcher of hot water down the drain to clear grounds debris and prevent blockage.
Weekly
1. Soak portafilters and the removed filter baskets in an approved espresso industry detergent and water
solution. Rinse thoroughly before reassembling and using your portafilters.
2. Carefully remove screens and screws from each brew group using a short handled screwdriver and soak
them overnight in a similar solution as the portafilters.
Note: Rinse screens and screws thoroughly before installing and using. Make sure you install the screens
before brewing any shots of espresso. Failure to do so may plug the drain lines with coffee grounds. DO
NOT overtighten the screw during reassembly.
Monthly
1. Check your water filtration system and make sure the cartridges and filters are changed as needed. In ar-
eas of high mineral content, hard water, high particulate count or in very
busy locations, the filtration sys-
tems will need to be checked more often.
Quarterly
- See Page 32 for Recommended 90 Day PM List
1. Change portafilter gaskets and closely inspect diffuser screens and filter baskets, If these items are show-
ing wear, please replace them as soon as possible. Change these items if they show damage or overuse.
2. Briefly inspect the machine for leaks or potential issues. Contact Synesso or your local distributor or ser-
vice agent to order parts and/or request service.
Annual
- Please Refer to Annual PM Checklist on Page 33
Synesso ™ recommends that you contact your distributor or service agent for periodic maintenance. The fre-
quency of maintenance visits will depend on a variety of factors including how much use the machine re-
ceives, but at least one preventative maintenance visit per year is required. During this yearly service, all
body panels must be removed and all connections both electrical and hydraulic must be inspected. Small
problems can become large if not caught early.