background image

86

TimeSource 3500

Installation

097-72050-01 Issue 7: August 2003

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

3

Unpacking

Use the procedures in the order they appear in this chapter to 
install the TimeSource 3500. If any difficulties are encountered 
during the installation process, contact Symmetricom’s Customer 
Technical Assistance Center (CTAC). Refer to the Technical 
Assistance section of the Troubleshooting chapter for telephone 
numbers.

CTAC includes Product Technical Support for technical 
information, and Customer Service for information about an order, 
RMAs, and other information.

Warning:

When handling electronic equipment, use local 

office procedures regarding electrostatic discharge (ESD), 
including:

Use grounded wrist straps connected to equipment 
frame ground when handling cards.

Store cards only in antistatic packaging provided by 
the factory.

Note:

Save packing material. All equipment returned 

must be 

packed in the original packing material

. Contact Customer Service if 

additional packaging is needed.

Unpack equipment carefully; check for completeness against the 
purchase order. Notify Symmetricom if items are missing.

Inspect equipment for shipping damage, including bent or loose 
hardware, and broken connectors.

If equipment was damaged in transit, contact Customer Service to 
request an RMA, and notify the carrier.

Содержание TimeSource 500



















































































































































































































































































































Отзывы: