Symmetricom TimeSource 500, Руководство пользователя

Страница: 168 / 306

168
TimeSource 3500
TL1 Reference
097-72050-01 Issue 7: August 2003
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
4
<modifier> Equipment initiating the alarm or event message, which is one of the
following:
TS3500 = system software
GPS
= GPS receiver software
SPAN-x = T1 span input
<mondat> Date of the performance monitoring data.
<montm> Time of the performance monitoring data.
<montype> Data type of the performance monitoring data.
<monval> Value of the performance monitoring data.
<ntfcncde> Notification code showing the alarm severity, which is one of the following:
CR = critical
MJ = major
MN = minor
<ocrdat> Occurrence date in the 8-digit form: yyyy-mm-dd (command) or yyyy:mm:dd
(response or message), where yyyy is the year, mm is the month (01 to 12),
and dd is the day of the month (01 to 31). For example, May 3, 2000 is
2000-05-03.
<ocrtm> Occurrence time in the 6-digit form: hh-mm-ss (command) or hh:mm:ss
(response or message), where hh is hours (00 to 23), mm is minutes (00 to
59), and ss is seconds (00 to 59). For example, 2:34 pm is 14:34:00.
<pid> Private identifier, factory-set to “TS3000!!”. It is the initial password for the
TELECOM <uid>. Passwords are encrypted when stored in the
TimeSource 3500, and are never transmitted from the shelf. The pid contains
a case-insensitive string of 8 to 10 ASCII characters, and must include at least
one letter, one numeral, and one special character from the following:
! " $ % & ' ( ) * + - . / < > ? @
Table I. Parameter Definitions (cont’d)
Parameter Definition