manualshive.com logo in svg

Symetrix Jupiter 12, Быстрый старт

Поделиться
Скачать
Symetrix Jupiter 12 Скачать руководство пользователя страница 7

7

Jupiter

6408 216th Street SW 

|

 Mountlake Terrace, WA 98043  USA

T

 +1.425.778.7728  

F

 +1.425.778.7727 

|

 

www.symetrix.co

Front Panel

Item

Description

Comments

Inputs

Four (4), eight (8) or twelve (12) 

bi-color LEDs on Jupiter 4, 12 or 8 

respectively.

Illuminate green to indicate signal present (> -48 dBu), amber between 0 and +23 dBu and red to 
indicate clipping (> +24 dBu).

Outputs

Four (4), eight (8) or four (4) bi-color 

LEDs on Jupiter 4, 12 or 8 respec

-

tively.

Illuminate green to indicate signal present (> -48 dBu), amber between 0 and +23 dBu and red to 
indicate clipping (> +24 dBu).

Power

Green LED

Illuminates to indicate the device is powered on and fully operational. Flashes while device is 
booting.

ARC (LED)

Green LED

Illuminates to indicate ARC port (RS485) connection on the front or rear port.

Network

Bi-color LED

Illuminates green to indicate network (Ethernet) activity, amber to indicate acquisition of a network 
address in DHCP mode.

ARC (Connector)

RJ45 connector

Distributes power and control data to Symetrix ARC wall panel remotes. Uses standard straight-
through UTP CAT5 cabling.

1

! 

 Warning! Refer to the RJ45 Warning for compatibility information.

Mechanical Data and Front Panel

Mechanical Data

ITEM

DESCRIPTION

DETAILS

Space Required

1U (WDH: 48.02 cm x 19.05 cm x 4.37 cm / 18.91 in x 
7.5 in x 1.72 in), depth is specified from front panel to 

back of connectors.

Allow at least 3 inches additional clearance for rear panel con

-

nections. Additional depth may be required depending upon your 
specific wiring and connections.

Electrical

100-240 VAC, 50/60 Hz, 25 Watts maximum.

Universal input.

Ventilation

Maximum recommended ambient operating temperature 
is 30 C / 86 F.

Ensure that the left and right equipment sides are unobstructed 
(5.08 cm, 2 in minimum clearance). The ventilation should not be 
impeded by covering the ventilation openings with items such as 
newspapers, tablecloths, curtains, etc.

Certifications or Compliance

UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 
55103-2, FCC Part 15, RoHS

Shipping Weight

8 lbs. (3.63 kg)

All specifications and features subject to change without notice.

Содержание Jupiter 12

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды