![Symetrix Jupiter 12 Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/symetrix/jupiter-12/jupiter-12_quick-start-manual_1419557012.webp)
12
Quick Start Guide
6408 216th Street SW
|
Mountlake Terrace, WA 98043 USA
T
+1.425.778.7728
F
+1.425.778.7727
|
www.symetrix.co
Unbalanced Connections
Unbalanced out to balanced in:
The RCA connector and the 1/4” TS connector are
unbalanced connectors. However, the wiring differs
depending on if they are sending to, or receiving from
a balanced connector. In this example, the unbalanced
connector is sending signal to a balanced connector.
When wiring this connection, use a shielded twisted pair
cable. The balanced side wires the same as a standard,
balanced connection. On the unbalanced side, you wire the
white (minus) wire together with the ground. This provides
some common mode rejection at the balanced input.
Balanced out to unbalanced in:
When your output requires a balanced connector, but you are
sending signal to an unbalanced input, the rules change. Use
a single strand shielded wire. Wire only to the plus and
ground terminals of what would typically be the balanced
connector.
XLR Male Plug [balanced]
TS 1/4" Plug [unbalanced out to balanced in]
TRS 1/4" Plug [balanced]
Euroblock [balanced]
Tip = (+) Plus
Sleeve = (-) Minus and Ground
RCA Plug [unbalanced out to balanced in]
Sleeve = (-) Minus and Ground
Tip = (+) Plus
Terminal Strip [balanced]
TS 1/4" Plug [balanced out to unbalanced in]
Tip = (+) Plus
Sleeve = Ground
RCA Plug [balanced out to unbalanced in]
Sleeve = Ground
Tip = (+) Plus
Euroblock [unbalanced] Terminal Strip [unbalanced]
XLR Female Plug [unbalanced]
Pin 2 = (+) Plus
Pin 3 = Unused
Pin 1 = Ground
Pin 2
Pin 3
Pin 1
TRS 1/4" Plug [balanced]
Tip = (+) Plus
Ring = Unused
Sleeve = Ground
Wiring Reference
Содержание Jupiter 12
Страница 1: ...Jupiter 4 Jupiter 8 Jupiter 12 Quick Start Guide ...
Страница 2: ......