manualshive.com logo in svg

Symetrix Jupiter 12, Быстрый старт

Поделиться
Скачать
Symetrix Jupiter 12 Скачать руководство пользователя страница 11

11

Jupiter

6408 216th Street SW 

|

 Mountlake Terrace, WA 98043  USA

T

 +1.425.778.7728  

F

 +1.425.778.7727 

|

 

www.symetrix.co

XLR Male Plug [balanced]

Pin 2
Pin 3
Pin 1

Pin 2 = (+) Plus
Pin 3 = (–) Minus
Pin 1 = Ground

XLR Female Plug [balanced]

Pin 2 = (+) Plus
Pin 3 = (–) Minus
Pin 1 = Ground

Pin 2
Pin 3
Pin 1

Terminal Strip [balanced]

TRS 1/4" Plug [balanced]

Tip = (+) Plus
Ring = (–) Minus
Sleeve = Ground

Euroblock [balanced]

NOTE:

 Detachable Euroblock 

and Terminal Strip connectors 
are designed for use with bare 
wire. Do not tin stranded wires 
before inserting them into the 
connectors. 

Special Case: Female XLR 
connectors will
ALWAYS be used coming 
from the OUTPUT of a 
device.
Male connecters plug into 
the INPUT of a device.

Balanced Connections

Any of these connectors can appear on either side of  
a balanced connection.

NOTE:

 In the case of an XLR connector, the Female attaches 

to an output, while the Male attaches to an input.

Unbalanced Connections

The RCA connector and the 1/4” TS connector are unbalanced connectors, wired with a single strand shielded wire and can 
be placed on either end of an unbalanced connection

TS 1/4" Plug [unbalanced]

Tip = (+) Plus
Sleeve = (-) Minus and Ground

RCA Plug [unbalanced]

Sleeve = (-) Minus and Ground
Tip = (+) Plus

1

!

 

IMPORTANT NOTICE 

1

!

The wiring diagrams on these pages are included 

for 

information purposes only

.

Symetrix

 can not anticipate every connector type on 

non-Symetrix products. 

It is the user’s responsibility 

to determine what connection is needed.

In addition, 

Symetrix accepts no responsibility for 

injury or damage caused by user created wiring.

Wiring Reference

Содержание Jupiter 12

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды