■
Typical , which installs both the Scanner and Control Center on the same
machine in a location you specify, with subcomponents under that location,
or
■
Custom, which allows you to install a Scanner or the Control Center
individually, as well as specify locations for the MTA data and log
directories (if you are installing a Scanner), or the port number for your
Tomcat installation (if you are installing the Control Center).
5
Type the number of the option you want to select or deselect it, then type 1
to proceed.
The Installation Directory screen is displayed.
6
Specify an alternate location, or type
1
to accept the default value, and then
then type
0
to proceed.
The default value is
/opt/Symantec/SMSSMTP/
■
If you selected the default installation configuration in step
13 5
, the
Installation Parameters Summary screen is displayed. Proceed to step
1
.
■
If you selected the custom installation configuration in step
5
, the Feature
Selection panel is displayed. Proceed to step
7
.
7
If you are installing both a Scanner and the Control Center, type
0
to proceed,
otherwise, type the number for the component you are not installing to
deselect it, and then type
0
to proceed.
8
If you are installing the Control Center only, proceed to step
12
.
If you are installing a Scanner, the MTA Data Directory screen is displayed.
This is the directory used for message queue data. The default location for
this directory is
/opt/Symantec/SMSSMTP/mta
9
Specify an alternate location, or type
1
accept the default value, and then
then type
0
to proceed.
The Log Directory screen is displayed. All log data for this Scanner will be
stored in the directory you specify. The default location for this directory is
/opt/Symantec/SMSSMTP/logs
.
10
Specify an alternate location, or type
1
to accept the default value, and then
then type
0
to proceed
31
Installing Symantec Mail Security for SMTP
Installing on Solaris and Linux
