6
If you are installing both a Scanner and the Control Center, click Next,
otherwise, uncheck the box for the component you are not installing, and
then click Next.
7
If you are installing the Control Center only, proceed to step
11
.
If you are installing a Scanner, the MTA Data Directory panel is displayed.
This is the directory used for message queue data. The default location for
this directory is
C:\Program Files\Symantec\SMSSMTP\mta
8
Click Browse to specify an alternate location, or accept the default value, and
then click Next.
The Log Directory panel is displayed. All log data for this Scanner will be
stored in the directory you specify. The default location for this directory is
C:\Program Files\Symantec\SMSSMTP\logs
9
Click Browse to specify an alternate location, or accept the default value, and
then click Next.
■
If you are installing both a Scanner and the Control Center on this machine,
proceed to step
12
.
■
If you are installing a Scanner individually (with no Control Center on
this machine), the Control Center IP panel is displayed. You must provide
a specific IP address, CIDR, or subnet mask from which the Control Center
is allowed to access this Scanner.
10
Enter an IP address, CIDR, or subnet mask and click Next.
11
If you are installing the Control Center, the Tomcat Port panel is displayed.
Accept the default value (41443), or enter an alternate value, and then click
Next.
The Installation Parameters Summary panel is displayed.
The port number you specify for Tomcat to use must be higher than 1024.
12
Verify the list of installation parameters and click Install.
The installation completes, and the components you have installed are started
automatically.
A log of the installation is placed in
C:\Program Files\Symantec\SMSSMTP\install_log.txt
29
Installing Symantec Mail Security for SMTP
Installing on Windows
