SwyxPhone for Experts
86
6.7.1
Starting a Conference
If you have at least two lines with the state “Active” or “On Hold”, the entry “> Conference”
will appear in the available menu. This provides you with the option of creating a conference
between these subscribers and yourself.
This is how you start the conference
Requirement: You have at least two lines with the state of “Active” or “On Hold”.
1.
Press the “Conference” button.
1.
confirm the menu item “Conference” with
9
.
All of the individual calls which you are currently having, both the active and held calls, will
be joined into one conference. All lines, except for the conference line, will be free again.
The LED of the “Conference” button is glowing and the message “Conference” appears in
the display. A welcome signal will be produced for all conference participants.
All participants will have the following on their display:
Please remember that you can only start
one
conference at a time. However, you can participate
in other conferences. These conferences must have been started by other subscribers.
6.7.2
Inquiry Calls and Add
If you are a participant of a conference, you can start an Inquiry Call to another subscriber
during this conference. You can add further conference participants during such an Inquiry Call.
The other subscriber can then create a conference of which you are a member. In such a
situation, you can then use the “Conference” button to join both conferences into one.
This is how you start an Inquiry Call from a conference
Assumption: You are a participant of a conference.
1.
Press on a free Line button
Or
1.
Choose the menu option “Call Swap”.
In each case the line with the conference will be put on “Hold”. You can now enter the phone
number for the Inquiry Call on the next free line.
2.
Complete your Inquiry Call and switch back to the conference with “Call Swap”.
• Call Swap between conferences
You are participating in different conferences, e.g. the subscriber you made an inquiry of
has created a conference with you and a third person, and you can now use “Call Swap”
Starting a Conference
L0x:Conference
<Call duration>
Conference
Disconnect
Note
Speaker = <Status>
Secondary call = <Status>
Call swap
Inquiry Call from a
Conference
Содержание SwyxPhone L420
