SWM RS 125 R 2020, Руководство по эксплуатации и обслуживанию

Страница: 116 / 304

10 m
9 x
10
x
EN -
53
EN
HEADLIGHT ADJUSTMENT
When checking the proper aiming of the headlight
beam: inflate tyres at the right pressure, have a person
sit astride the motorcycle and set the motorcycle
perpendicular to its longitudinal axis.
At 10 metres from a wall or screen, trace a horizontal
line at the height of headlight centre and a vertical one,
in line with vehicle longitudinal axis.
If possible, carry out this check in a shaded place.
The direction can be adjusted as follows:
-
Operate on the adjustment screw (1);
-
screw to raise the beam;
-
unscrew to lower the beam.
When the high beam is on, the upper edge between
dark and lit zone should be at a height not exceeding
9/10th of headlight centre height from ground.