Swisscom ATON CL401 Скачать руководство пользователя страница 62

Страница: 62 / 74

Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / appendix.fm / 7.5.08

ion 4,

.09.

2005

"Base station x"

flashes

on the display.

1. The handset is outside the range of the

base station.

Move the handset closer to the base sta-

tion.

The base station's range is reduced because

eco range is activated.

Deactivate eco range (page 13) or

reduce the distance between the hand-

set and the base station.

2. The handset has been deregistered.

3. The base station is not turned on.

Check the base station's mains adapter

(page 8).

"Base Search" flashes in the display.

The handset is set to

Best Base

and no base sta-

tion is turned on or within range.

Move the handset closer to the base sta-

tion.

Check the base station's mains adapter

(page 8).

Handset does not ring.

1. The ringer is deactivated.

Activate the ringer (page 47).

2. Call diversion set to

All Calls

Deactivate call diversion (page 56).

3. MSN is not assigned to internal subscriber

or is incorrect.

Specify receive MSN (page 54).

The handset does not ring as set

The MSN is assigned a different ringer tone.

Set the external ringer on the handset

(page 46).

Handset does not ring after setting up the

ISDN phone number (MSN)

The area prefix has been stored with the MSN.

Save MSN without area code.

Some of the ISDN functions do not work as

specified.

ISDN functions are not enabled.

Check with your network provider.

You cannot hear a ringer/dialling tone from

the fixed line network.

ISDN cable may be faulty.

Replace ISDN cable.

Error tone sounds after system PIN prompt

You have entered the wrong system PIN.

Reset the system PIN to 0000 (page 57).

Forgotten the system PIN.

Reset the system PIN to 0000 (page 57).

Call charges are not displayed.

1. Your network provider does not support

this feature.

2. There are no units.

The units (0.10) are not transferred.

3. Charges per unit are set to "00.00".

Set the charge per unit (page 30).

A fee factor of CHF 0.10 is automatically

transferred in the Swisscom ISDN net-

work.

The other party cannot hear you.

You have pressed the

(INT) key. The hand-

set is "muted".

Activate the microphone again (page 19).

The number of the caller is not displayed

despite CLIP

Calling Line Identification is not enabled.

CLIP does not work

You hear an error tone when keying an

input

(a descending tone sequence).
Action has failed/invalid input.

Repeat the operation.
Watch the display and refer to the user

guide if necessary.

For call diversion, the divert conditions are

not displayed.

Internal call diversion is activated.

Activate external call diversion.

Ask your network provider to enable this

feature.

You cannot listen to messages on the net-

work mailbox

Your PABX is set for dial pulsing.

Set your PABX to touch tone dialling.

Содержание ATON CL401











































































Результаты поиска

Содержание ATON CL401

Отзывы:

Похожие инструкции для ATON CL401

Бренды по названию

Популярные бренды

Swisscom ATON CL401, Руководство пользователя

Результаты поиска

Содержание ATON CL401

Отзывы:

Похожие инструкции для ATON CL401

Бренды по названию

Популярные бренды