56
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / registr_sett.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
Diverting calls
Diverting calls internally
Only one diversion destination can be set
for internal call diversion. If you are divert-
ing to a party who has activated internal
call diversion, your divert will still end with
this party.
The diverted call will always ring at the
party you diverted it to.
The following settings are each confirmed
by a message in the display and an
acknowledge tone.
Setting up call diversion
v
¢
ê
¢
Call Divert
¢
(system PIN if
necessary)
¢
To Internal
¤
Change multiple line input:
Call Divert
Select
On
or
Off
.
Dest.
Press the display key
§Edit§
. The list of
internal parties is displayed. Your own
handset and
Call All
are not displayed.
q
Select party and press
§OK§
.
Ring Delay
You can define when call diversion
should occur. You can set 0 (= immedi-
ate call diversion), 10, 20 or 30 sec-
onds.
¤
Save the changes.
a
Press
and
hold
(idle status).
Diverting calls externally
For each receive MSN you can save a des-
tination number for each of the following
three conditions:
All Calls
–
When Busy
–
No Answer
The three conditions can be activated
simultaneously.
Calls diverted to an external number are
entered in a list. Calls currently being
diverted are marked with
‰
.
The following settings are each confirmed
by a message in the display and an
acknowledge tone.
Setting up call diversion
v
¢
ê
¢
Call Divert
¢
(system PIN if
necessary)
¢
To External
No call diversion is set up:
§New§
Press the display key.
The list displays calls that have been
diverted. To set up an additional call diver-
sion:
§Options§
Open menu.
New Entry
Select and press
§OK§
.
¤
Change multiple line input:
Activation:
Select
On
or
Off
.
For:
Select MSN, e.g.
MSN 1.
Dest.:
Press the display key
§Edit§
. Enter number
(max. 20 digits) and press the display
key
§Save§
.
When:
Select condition, e.g.
All Calls
.
¤
Save the changes.
Editing entries
¤
Open the list of calls currently being
diverted.
q
Select call diversion.
§Change§
Press the display key.
¤
Make changes as described under
"Setting up call diversion" and save.
Cancelling external call diversion
¤
Open the list of calls currently being
diverted.
q
Select call diversion.
§Options§
Open menu.
Delete Entry
Select and press
§OK§
.