Swisscom ATON CL401, Руководство пользователя

Страница: 58 / 74

57
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / registr_sett.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
Setting the base station
The base station settings are made using a
registered handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must be entered when, for
example, registering/deregistering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only by you.
v
¢
Ð
¢
Base
¢
System PIN
~
Enter the current system PIN
and press
§OK§
.
~
Enter new system PIN. For
security, the PIN is shown as
four stars (****).
s ~
Jump to the next line, re-enter
new system PIN and press
§OK§
.
a
Press and hold (idle status).
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000 :
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a while.
The base station has now been reset and
the system PIN 0000 set.
Activating/deactivating music
on hold
v
¢
Ð
¢
Base
¢
Music on hold
Press
§OK§
to activate or deactivate music
on hold ( = on).
Repeater support
With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
The eco range is deactivated.
v
¢
Ð
¢
Base
¢
Add. Features
¢
Repeater Mode
§Yes§
Press the display key.
When repeater mode is active, the menu
item is marked with .
Restoring the base station to the
factory settings
When the settings are restored
u eco range is deactivated
u handsets are still registered
u
the system PIN is not reset
v
¢
Ð
¢
Base
¢
Base Reset
~
Enter the current system PIN if
necessary and press
§OK§
.
§Yes§
Press the display key.
Cancel the restoring process by pressing
a
or the display key
§No§
.
a
Press and hold (idle status).
Please note:
All handsets are deregistered and must be re-
registered.
Please note:
Repeater support and eco range (see page 13)
cancel each other out, i.e. both functions can-
not be used at the same time.
‰
‰