58
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / pabx.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
Connecting the base station
to a PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Saving an access code
(outside line code)
Precondition:
You may have to enter an
access code for external calls in your PABX,
e.g. "0".
v
¢
Ð
¢
Base
¢
Add. Features
¢
Access Code
~
Enter or change access code,
max. 4 digits.
¤
Save the changes.
If an access code is saved, the following
applies:
u
The access code is prefixed automati-
cally when dialling from the following
lists: SMS centre numbers, calls list.
u
The access code must be entered when
dialling manually and when manually
entering directory or emergency/direct
dial numbers.
u
If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u
To delete an existing access code, place
the cursor to the right of the access
code using
u
/
v
and delete the code
using
X
.
Dialling options
The KEYPAD function allows you to control
certain features by entering sequences of
characters and digits.
The KEYPAD function must be activated
when you connect your Aton CL401
ISDN
to an ISDN PABX that is controlled using
KEYPAD protocol. The digits/characters
0–9, * and # are sent as keypad informa-
tion elements. Please ask your service pro-
vider about the information and codes you
can transmit.
Setting options
You can switch between the
Auto. Tone
Dial
,
Auto. Keypad
and
Dial of * and #
set-
tings.
Auto. Tone Dial
Once normal dialling has been acti-
vated, * and # are not transmitted dur-
ing dialling and if * and # are entered it
is not possible to switch to the keypad.
Auto. Keypad
Once * or # have been entered, this set-
ting automatically switches signalling
during dialling to the keypad. This auto-
matic switchover is needed for giving
commands to the exchange or PABX.
Dial of * and #
Once Dial of * and # has been acti-
vated, the * and # characters are trans-
mitted during dialling as commands to
the exchange or PABX.
Regardless of the setting options above,
after dialling or during a call, the phone
automatically switches to touch tone dial-
ling (DTMF), e.g. for remote control of an
answer machine.
v
¢
Ð
¢
Base
¢
Add. Features
¢
Dialling Mode
q
Select setting and press
§OK§
,
e.g.
Auto. Tone Dial
(
‰
= on).
Please note:
There are several ways of assigning an MSN to
ISDN extension systems. For more information
on this topic, please refer to the user guide
belonging to your extension system.
