Harness features
Section 03
21
Fig. 19: Shortening a leg loop
The adjustment is correct if you are able to get
into your flying position without using your
hands.
The type of clothes you are wearing makes a
difference here, because they can make it
either easier or more difficult for you to “settle
into” the harness.
The leg loops are adjusted using the buckles.
Make sure that the leg loops are even.
Speed system
The CONNECT REVERSE 3 is designed for use
with a speed bar. The pulley required for this is
ideally positioned in order to ensure the perfect
flow of force. It is a high-quality, smooth-running
pulley. T
he cord in
si
de the harness ensures
energy-saving and efficient use of the speed bar
.
Adjusting the speed bar
After you have set up the best seating position,
the speed system must be adjusted. The pulleys
required are already on the harness.
The speed bar line is attached to the harness
as shown in Fig. 20. First feed it through the
ring attached at the front underneath the seat
(1), which is attached with elastic. It then goes
through the metal eyelet (2) in the guide
channel, and on through the pulley (3). Next it
just has to be fed through the small ring (4) and
attached using a Brummel hook. Finally attach
the retaining band (5) to the speed bar at the
correct length.
Fig. 8: Installing the speed system
Foot stirrup and leg cover
Please check our website www.SWING.de for
information about compatible foot stirrups and
leg covers for the CONNECT REVERSE 3. Only
the products named may be used.
There is a risk that the harness will be
damaged if you attach the wrong foot stirrup, in
particular one which is attached only at the two
front loops.
TIP
A video showing how to install the
speed system and foot stirrup is
online:
www.bit.ly/CREspeedbar
