Harness features
Section 03
17
Closing the container
Feed a flexible plastic tube (included with
SWING reserves) or a thin cord (paraglider line)
into each elastic loop, then feed them through
the eyelets on the harness container, starting
with the smallest, so as to pull them together.
Follow the order given in Fig. .
Feed the pins into the elastic loops under the
transparent cover. The cord or plastic tube
must now be removed. Pull it out slowly so that
the elastic loops are not damaged by excessive
friction. Finally the handle will be inserted under
the plastic cover.
Fig. 7: Elastic closures with pack cord/tube
Fig. 8: Lower flap closed
Fig. 4: Upper flap closed
Fig. 5: Front flap secured with pins, deployment handle
stowed away
WARNING
The integrated container under the seat
must be securely closed if it is not being
used.
In this case, the deployment handle should
not be mounted on the harness, to avoid any
confusion.
