background image

6

PVD2000 / PVS / PVM 

D

ok

: 101503A

-GB  1931

WARNING Trapping hazards

   

There is a risk of neck ware, hair, gloves, and        

clothes getting dragged into or caught by rotating         

machineparts.This may cause choking, scalping,    

lacerations, or death.To reduce the risk:

    Never grab or touch a rotating machine part.
    Avoid wearing clothing, neck ware or gloves        

that may get caught.

    Cover long hair with a hair net.

DANGER Electrical hazard

   

 The machine is not electrically insulated. If the 

machine comes in to contact with electricity, serious 

injuries or death may result. 

    Never operate the machine near any electric wire or 

other source of electricity.

    Make sure that there are no concealed wires or other 

sources of electricity in the working area.

DANGER Concealed object hazard

   

During operating, concealed wires and pipes        

constitute a danger that can result in serious injury.

   Check the composition of the material before        

operating.

   Watch out for concealed cables and pipes for          

example electricity, telephone, water, gas, and        

sewage lines.

    If the machine seems to have hit a concealed object, 

switch off the machine immediately.

    Make sure that there is no danger before continuing.

WARNING Involuntary start

   Involuntary start of the machine may cause injury.

   Keep your hands away from the start and stop device 

until you are ready to start the machine.

   Learn how the machine is switched off in the event 

of an emergency.

WARNING Noise hazard

  

 High noise levels can cause permanent and 

disablinghearing loss and other problems such as 

tinnitus(ringing, buzzing, whistling, or humming in 

the ears).To reduce risks and prevent an unnecessary 

increase in noise levels:

    Risk assessment of these hazards and implementa-

tion of appropriate controls is essential.

    Operate and maintain the machine as recommended 

in these instructions.

    If the machine has as ilencer, check that it is in place 

and in good working condition.

    Always use hearing protection.

TRANSPORT, PRECAUTIONS

WARNING Loading and unloading hazard

   

When the machine is lifted by a crane and similar 

appliance, this can lead to injury.

    Use marked lifting points.
    Make sure that all lifting devices are dimensionedfor   

the weight of the machine.

    Never remain under or in the immediate vicinity of 

the machine.

MAINTENANCE, PRECAUTIONS

WARNING Unexpected start hazard

  

 During maintenance or when changing blades on the 

machine, there is a risk that the engine backfires or 

that the machine unexpectedly starts. This applies 

especially when the engine is hot and if the switch 

is in position ON.This can result in serious personal 

injury. 

    Always let the engine cool down.
    Always turn the switch to position OFF.

    Always take the cap off the spark plug.

WARNING Unexpected start hazard

  

 Any machine modification may result in bodily        

injuries to yourself or others.

    Never modify the machine. Modified machines     

are not covered by warranty or product liability.

    Always use original parts, insertion tools, and        

accessories.

    Change damaged parts immediately.
    Replace worn components in good time.

CAUTION High temperature

  

 The machine’s engine exhaust pipe, and bottom      

become hot during operation. Touching them can 

lead to burns.

    Never touch a hot machine.
    Never touch the bottom of the machine when its hot.
    Wait until the engine, exhaust pipe, and bottom of  

the machine have cooled down before carrying out 

maintenance work.

STORAGE, PRECAUTIONS

    Keep the machine in a safe place, out of the reach 

of children and locked up.

Содержание PVD 2000

















Отзывы: