manualshive.com logo in svg

Swegon COMPACT Air, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Swegon COMPACT Air Скачать руководство пользователя страница 16

GB.COMPACTAHSK.210520

Registered design. The company reserves the right to make design changes without prior notice.

16     www.swegon.com

7.5 Air Adjustment

The speed of the fans can be locked for up to 72 hours. 
This is practical in conjunction with adjusting the airflow in 
the duct system. 
The period desired is preset but can be interrupted earlier 
by selecting STOP in the menu or by changing the time 
setting to 0.

7.6 Alarms

If an alarm is initiated, this is shown in the hand-held ter-
minal both as clear text and by a blinking red diode.
This menu enables you to read alarms quickly.

ACTIVE ALARMS

Shows alarms that are active but have not initiated an 
alarm signal in the display. This applies to alarms that have 
a long delay, i.e. airflow or temperature alarms.

ALARM HISTORY

The 10 most recent tripped alarms are shown.

Alarm settings can be entered at INSTALLATION 
LEVEL under ALARM SETTINGS.
For complete description of alarms, see Section 18.

AIR ADJUSTMENT

*AIR ADJUSTMENT*
LOCKS FAN SPEED.
TIME SETTING:     0 h

ALARMS

*ALARMS*
ACTIVE ALARMS
ALARM HISTORY

Содержание COMPACT Air

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды