1080P SDI PTZ Camera User Manual
5
Preparation for Installation
Basic requirements.
All the electronic operation should be strictly comply with the electrical safety regulations,
fire prevention regulations and other related regulations in your local region.
Check whether all the accessories are included and make sure that the installation place and
mode conform to your requirement.
Please use this product according to the requirement of the working environment.
Check installation space.
Make sure the place you wish to install the camera has enough space to install the speed dome
and its accessories.
Check the intensity of conformation at the installation location.
Please make sure that the walls are strong enough to withstand up to 8 times the weight of
speed dome and its accessories to ensure the effects of wind, snow and rain do not weaken the
mounting point.
Preparation of cables.
For the SDI speed dome the supplied cable is designed to provide reliable operation, if you
wish a longer cable run the cable we recommend you choose the appropriate video cable
according to the transmission distance. The cable should meet these minimum requirements:
75Ω resistance
; 100% copper core conducting wire; 95% braided copper shield.
For the SDI speed dome, RS485 communication cable, please refer to Appendix 2.
24V AC power cable, please refer to Appendix 3.
Please keep all wrappers and protective packing.
Please keep all wrappers after unpacking them for future use. In case any failure occurs and you
need to return the speed dome to Swann, you must ship with the original wrapper.
Note:
Transportation without the original wrapper and packing may result in damage on the
speed dome and may void the warranty.
