1080P SDI PTZ Camera User Manual
13
1.1.2
Connecting the Cables
Before you start:
Please make sure to turn off the power of the dome before connecting the cables.
The cable interfaces of the SDI speed dome are shown in Figure 1-9. The cables of RS-485, power
supply, etc. are distinguished by different colors. Please refer to the labels attached to the cables for
identification.
Use the supplied screw terminal blocks to connect the power connector socket to the red and black
24V AC leads. Plug the power connector in to the power plug of the coaxial cable as shown in the
picture below.
Figure 1-9
Cables of the SDI Speed Dome – Power, RS485 and Video shown connected to cable.
24V AC Black
GND Yellow-green
24V AC Red
RS485- Yellow
RS485+ Orange
Video Output
