Swann 1080p SDI, Руководство пользователя

Страница: 3 / 22

1080P SDI PTZ Camera User Manual
3
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or
property loss. The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings:
Follow these safeguards to prevent
serious injury or death.
Cautions:
Follow these precautions to
prevent potential injury or
material damage.
Warnings

For use of this product you must be aware of and comply with the electrical safety regulations of
the nation and region.

Please use the power adapter which is provided in the kit, use of other power adapters is not
supported.

Do not connect several devices to one power adapter as adapter overload may cause over-heat
or fire hazard.

Please make sure that the plug is firmly connected to the power socket.

When the product is installed on a wall, the device should be securely fixed.

If smoke, odors or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the Swann Tech Support team.

If the product does not work properly, please contact Swann Tech Support. Never attempt to
disassemble the camera yourself. (We shall not assume any responsibility for problems caused
by unauthorized repair or maintenance.)
Cautions

Do not drop the dome or subject it to physical shock, and do not expose it to high
electromagnetic radiation. Avoid installation on vibrating surfaces or places subject to shock
(failure to observe the warnings can cause equipment damage).

Do not place the dome in extremely hot, cold, dusty or damp locations, otherwise fire or
electrical shock can occur. The operating temperature should be -30°C ~ 65°C (outdoor speed
dome).

Do not expose the equipment to direct sun light, low ventilation or heat sources such as heaters
or radiators.

Do not aim the camera at the sun or extra bright light sources as this could damage the sensitive
images sensor.