2.
Connect a network cable from any one of the RJ-‐45 Ethernet ports on the encoder to a network port
on a SVSi decoder. The maximum distance between network ports is 100-‐m. Network switches can be
used to extend distances as needed in 100-‐m increments.
3.
Connect the VRR104 or VRR204 decoder to a digital video port on the display (either DVI or HDMI) with
appropriate cable. The VRR104 supports embedded digital audio-‐over-‐DVI and de-‐embedded analog
audio from the dual RCA connectors. Both embedded digital and de-‐embedded analog audio signals
can be accessed at the same time; however, audio-‐over-‐DVI is disabled by default and must be enabled
in software before use. The VRR204 supports only embedded digital audio-‐over-‐DVI. Note: when using
a computer monitor as display, audio-‐over-‐DVI must be disabled or image will be corrupted.
4.
As soon as the decoder is powered up and all cables connected, the splash screen show below stored
on the decoder will appear. If encoder and decoder are correctly connected, live video from the source
will be displayed.
Содержание ATR-201
Страница 3: ...Application Examples ...
