background image

Set-­‐Up   and   Installation   

Step   1:   Download   the   Software   

Each   ATR201   ships   with   an   auto-­‐IP   address   in   the   range   of   169.254.xxx.xxx   with   netmask   255.255.0.0.   Please   

download   SVSi’s   Conductor   NetLite   configuration   software,   free-­‐of-­‐charge   from   the   

Resources

   page.   

The   host   machine   running   Conductor   NetLite   must   have   a   unique   169.254.xxx.xxx   IP   address   assigned   to   its   

network   interface   connection   to   be   able   to   auto-­‐discover   and   communicate   with   the   ATR201.   After   discovery,   

a   static   IP   address   can   be   assigned   or   a   DHCP   server   used   to   define   the   unit’s   IP   address.   Audio   streams   can   be   

assigned   to   your   device   through   NetLite   or   SVSi’s   Conductor   VDC108   or   VDC208   hardware   controller.   

The   ATR201   does   not   ship   with   a   wall-­‐wart   power   supply   since   it   is   capable   of   POE   power.   Please   contact   your   

local   reseller   if   POE   is   not   available   and   an   external   power   supply   is   required.   

Step   2:   Install   the   software   

After   the   download   completes,   double-­‐click   the   downloaded   file   to   start   the   installation.   Follow   the   prompts   

to   install   NetLite   and   associated   Add-­‐Ons.   

Step   3:   Wire   your   Devices   together   

Follow   the   below   wiring   diagram   during   initial   setup   to   insure   first   time   success.   You   can   add   additional   

devices   to   what   is   shown   on   the   diagram,   or   include   a   switch.   However,   if   the   switch   is   improperly   configured   

for   SVSi   products,   problems   can   occur.   If   you   have   a   pre-­‐configured   switch   from   SVSi,   simply   attach   your   

devices.   

Add   your   computer   into   the   network   either   via   a   port   on   the   switch,   or   by   attaching   to   one   of   the   SVSi   devices.   

Diagram:   Blue   –   Network,   Black   –   Video   

   

Step   4:   Configure   your   computers   IP   Address   

SVSi   equipment   comes   default   with   an   IP   Address   of   169.254.XX.XXX.   Your   computer   MUST   have   an   IP   Address   

in   a   similar   range.   To   do   this   in   Windows   7:   

1.

 

Open   network   and   sharing   center.   

2.

 

Choose   “Change   Adapter   Settings”   on   the   Left   hand   side   of   the   screen.   

3.

 

Locate   the   appropriate   adaptor   in   your   list,   and   go   to   it’s   properties   (right-­‐click,   Properties)   

4.

 

Choose   TCP/IPv4   and   Select   Properties.   

5.

 

Select   “Use   the   following   IP   Address”   

Содержание ATR-201












Отзывы: