5.
The Background will turn Yellow. Continue attaching receivers to transmitters until you have made all
of your connections.
TIP: Start by attaching all of your Receivers to one Transmitter to verify on all devices that streaming is working
6.
Select the “Take” Button. This will make the changes in your matrix, and the background for all
checkboxes changed will turn blue.
Troubleshooting:
Auto-‐Detect Failure
If Auto-‐Detect failed to discover your attached devices, it is most likely a network configuration issue. Please
try the following steps to resolve the problem:
1.
Try to search by MAC Address.
A.
Locate the sticker on the bottom of the device that has the mac address. In the discovery
window, select “find by Mac Address”. Enter the MAC address and search.
B.
If the device is found, determine the units IP Address, and if it has a different IP Address from
the default, you may need to change the computers IP address to be in the same range. After
changing the computers IP Address, change the devices IP address to a corrected one and
continue.
2.
If Searching by MAC address FAILS:
A.
Start by disabling every network adaptor on your computer, except for the one connected to
the SVSi system. Attempt to Auto Discover Again.
B.
If that fails, do the following:
i.
On the conductor NetLite main screen select “conductor” and then “options”
Содержание ATR-201
Страница 3: ...Application Examples ...
