SVP HDR-106, Руководство пользователя

Страница: 30 / 213

HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
3.5 LEDs
The HDR-106 receiver has 4 Leds on its front panel that show the
information detailed below.
The
ON/OFF provides the following information:

If the Led is off, the equipment is not being fed.

If the Led flickers are red, there is power into the equipment but it is
turned off.

The Led lights up in green when the equipment is turned on.
The ALARM LED provides the following information:

The Led lights up in red when any alarm occurs.

The different alarms that can appear in the decoder are:
- Input Signal Not Present.
- Decoder Is Not Decoding.
The REMOTE LED provides the following information:

The Led lights up in green when the user is connected remotely to the
device.
The STATUS LED provides the following information:

The LED lights up when a change in the configuration of the device is
being processed.
Figure 3.12 HDR-106 LEDs
ON/OFF LED
ALARM LED
REMOTE LED
STATUS LED